你的位置:首页 > 新闻资讯 > 行业资讯

单柱校正液压机钻模的形式介绍

阅读:

关于单柱校正液压机信任我们都不陌生,今日小编要为我们介绍一下单柱校正液压机钻模的方式,期望能够让我们对其有愈加深化的了解:

1、单柱校正液压机固定式钻模固定式钻模在运用的过程中,钻模在单柱校正液压机上的方位是固定不动的。这类钻模加工精密度较高,首要用于立式上加工直径较大的单孔,或在液压机上加工平行孔系。

2、单柱校正液压机翻滚滚动式钻模翻滚滚动式钻模首要用于加工小规模作件不一样外表上的孔,翻滚滚动式钻模适合使用于夹具与作件总质量半大于lOkg、作件上钻制的孔径小于+8~410mm、加工精密度要求不高的场合。

1, single column correction hydraulic press fixed drilling die fixed drilling jig in the process of application, the drilling jig in the single column correction hydraulic machine on the fixed position is not fixed. This kind of drilling tool has high precision, mainly for vertical processing of larger diameter single hole, or processing parallel hole system on the hydraulic press.

2, single column hydraulic calibration jig rolling rolling rolling rolling type jig is mainly used for processing small pieces of different appearance of the hole, rolling rolling type jig and fixture parts suitable for use in total mass of more than lOkg, half pieces of drilled aperture is less than +8 ~ 410mm, the processing precision requirement is not high the occasion.


期望您会喜欢,我们诚挚为您供给最优质的单柱校正液压机产品,我们有专业的售后服务团队,令您无后顾之忧!

Expect you will like, we sincerely provide you with the best quality of single column correction hydraulic press products, we have a professional after-sales service team, so that you have no worries!


推荐产品