当前位置:主页 > 新闻资讯 >

新闻资讯

NEWS INFORMATION

增加液压机油缸的回油量会影响到动作性

时间:2021-03-13 17:45 点击次数:

四柱液压机速度的要求:一般标准的油缸,当动作速度超过2m/s时,其使用寿命将会受到影响。以0.3m/s作为冲程时,为了液压机维护组织和安全起见,主张内部装置缓冲组织。另外,使油缸休止时,为了维护油缸组织和安全起见,线路上也必需考虑,以避免发生很大的冲击。为了添加油缸的回油量,线路设计时应该特别留心。在0.5m/min以下低速工作时,将会影响到四柱液压机动作性。(特别是振动)

pbX1D.jpg

 

Hydraulic press speed requirements: general standard oil cylinder, when the speed of action is more than 2m/s, its service life will be affected. When 0.3m/s is used as a stroke, the internal device buffer organization is advocated in order to maintain organization and security. In addition, in order to maintain the oil cylinder, in order to maintain the oil cylinder organization and safety, the line must be considered in order to avoid a great impact. In order to add the amount of oil back to the oil cylinder, the circuit design should be particularly attentive. Action (especially vibration) will be affected by low speed working below 0.5m/min.

 

上一篇:四柱液压机各部件的结构和机能特色

下一篇:我国四柱液压机职业开展的六大方向

猜你喜欢

Copyright © 2003-2021 南通特力液压机有限公司 版权所有

在线客服 联系方式 二维码

服务热线

0513-81809272

扫一扫,关注我们